Vapcell S4 plus LCD Display 3A Intelligent Li-ion/IMR/Ni-MH Battery Charger 21700
| Ask a question
Regular price $49.95 USD
Regular priceUnit price per
Vapcell 4 slot 12A fast charge S4
Parameters and Features
Apply to (battery diameter:10-26mm,length:34-75mm)
3A each slot ,12A in total.
Charge/Discharge/Capacity test /Repair
Automatically select the optimum charge current.
Easily choose current you want at manual mode.
Wide & High charging current choice: 0.25A /0.5A /1A/1.5A/ 2A/ 2.5A/ 3A for each
Show charging status in real-time like voltage ,capacity,temperature,time,current.
Enough space for 21700 battery, even button top 21700, PCB 21700 .
Top surface have a button top type feature to make contact in recessed battery
It is compatible with every type of rechargeable battery.
Support 4 slots charging independently without interference.
Automatically activate and repair “0 voltage”lithium battery.
Automatically calculate battery charging time.
Automatically calculate the battery percentage.
Charging protection, over-discharge protection and protection of polar reverse,short
circuit protection .also, it can detect a broken battery.
Temperature control protection. Keep your battery safe, most important,your life
Intelligent power bank 5V 1A .
Certified by FCC CE ROHS .
Indoor condition only，and enough space for heat dissipation.
Don’t take apart your charger.
Keep it dry when you don’t use it .
Please don’t charge leakage, corrosion or dead battery
Please remember to cut off the power when you don’t use
Please don’t be exposed your charger to rain or water or snow.
Charger are getting hot during operation for a long time, handle with care!
This charger is for charging the cylindrical lithium-ion (li-ion 3.7v), Ni-Mh / Ni-Cd
batteries. Be sure to know LiFePO4 batteries(3.2V),Non-rechargeable batteries,
rechargeable alkaline batteries (RAM), lead acid batteries must not be charged with
S4 plus charger. There is danger of explosion!
Please read these instructions before use; pay attention to the recommended charging
current, never choose the wrong charging current.
Use the default configuration of the 12V5A adapter. If the user uses a low output
power adapter, the charger may not work, or its function may be limited.
Please cut off the electricity and remove the battery from the charger when charging
Data guideline of chargers are for your reference only; please refer to professional
instrumentation, if you need accurate data.
In order to reduce shock, please cut off the power when you clean the charger.
Don’t repair yourself. Please contact the professional maintenance person when you
Please make sure the correct program and setting are chosen and set . Incorrect
program or setting may damage the charger or case fire or explosion
Do not misuse in any way! Use for intended purpose and function only .