Free standard shipping on orders over $50
Battery not include
Emitter: 12 V Cree XHP35 High Intensity, neutral white, mounted on copper DTP MCPCB
Flux: >2000 lm
Intensity: >1 Mcd (ANSI throw >2000 m)
Firmware: Tom E’s open-source NarsilM v1.2
User interface:  By default the GT is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a 2.5 A
TURBO mode is also provided. A more conventional discrete level MODE-SET UI is available as an alternative. Anyone of 12 predefined mode-sets can be selected.MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
Battery: Four or eight button-top 18650 cells (4S1P or 4S2P). Protected cells are recommended. Cells are not included.
Driver: 35 W, 2.5 A regulated buck driver with conversion efficiency that exceeds 90%. Parasitic drain while OFF is ~150 μA (~250 μA with button back-light on).
Reflector: 118 mm ID, aluminum, smooth finish
Lens: Glass with anti-reflective coating
Body: Aluminum with Type III hard-coat anodizing
Tripod socket: Standard 1/4 inch threaded (1/4-20 UNC)
Button: Tactile with back-lit rubber boot
Ingress rating: Equivalent to IP65, do not immerse in liquids
Weight: Approximately 1.8 kg without cells
Dimensions: 135 mm Ø head x 315 mm length
CW(cool white)left, NW(Neutral white) the right
We can ship to most countries . Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the battery shipping is different, it need to be shipped inside of the flashlight .
We usually use the Yunexpress to ship the orders, you can tracking from the following website: