WildTrail WT3M 3* XHP50.2/SST40 6800lm EDC 21700 Flood Flashlight

Specification:

Features:

Emitter: 3x 3V Luminus SST40 5.000K (DC) 70CRI, mounted on copper DTP MCPCB

3x 3V Cree XHP50.2 6.000K (1D) 70CRI, mounted on copper DTP MCPCB

Luminous Flux: SST40: up to 5.500 lm

XHP50.2: up to 6.800 lm

Intensity: SST40: up to 44.000 cd (ANSI throw up to 430 m)

XHP50.2: up to 22.500 cd (ANSI throw up to 300 m)

Firmware: Open source software called Andúril, distributed under the terms of the GPL v3.

The source code is available from http://tiny.cc/TKAnduril

Firmware revision: 2019-12-03

Battery: 1x 21700 rechargeable lithium-ion battery

Battery length must be within 70mm and 72.5mm

Protected cells may not fit. Battery is not included.

Driver: FET driver with temperature control (see calibration in the UI chart)

Reverse polarity protection, low parasitic drain (< 120 µA)

Charging: USB-C port (input up to 5V 2A)

Reflector: Orange Peel (OP) aluminum alloy reflector

Lens: Glass with doubleside anti-reflective coating

Body: Aluminum with hard black anodized or clear coated aluminum alloy

Button: Tactile electronic side switch with back-lit boot

Ingress rating: Equivalent to IPX-8, do not immerse in liquids

Impact resistance: 2 m

Weight: 128 grams without battery

Package included:

1 x WildTrail WT3M Flashlight

1 x Manual