•
1 5

BLF

TLF/BLF FW3S SS Stainless Steel CREE XPL HI 2800lm EDC LED Flashlight

Write a review
| Ask a question

$61.95 USD
$61.95 USD
Options

 

 

Review by ZeroAir: FW3A Flashlight Review

Review by Marco: FW3A REVIEW

Review by Alex:FW3A REVIEW IN RUSSIAN 

                          FW3A REVIEW IN ENGLISH 

 

FW3A issues Information:
User Manual:
Coupon: NDFW3A     20%OFF 
Coupon:NDFW3C    
Coupon: NDFW3A    20%OFF 

FW3A accessories:

1.deep carry clip 

2.Glow gasket

3.glow tail button 

4.10507 optics 

5.sapphire lens 

6.drilled optics 

 

Instruction:

The FW3A was designed by Fritz15 and the flashlight forums TLF & BLF.

Brought to life by Lumintop.

A small 18650 triple LED lamp with tail switch and agreat, a compact, ergonomic, feature-packed EDC-style light.

More detail in TLF  

More Detail in BLF 

Specifications

Emitter:   Three LEDs on a copper DTP MCPCB e.g.
                 Cree XP-L HI 3D(NW 5000K) and Cree XP-L HI 7A(WW 3300K) LED 
                 Cree XP-L HI 1A(CW 6500K)
                 Nichia 219C 4000K
                 Luminus SST20 4000K
Optic:       Standard TIR optics
Lens:       Glass with anti-reflective coating
Flux:        ~2800 lm (XP-L Hi), ~1600 lm (Nichia)
Intensity: ~12 500 cd ANSI throw ~223 m (XP-L Hi)
Firmware: The FW3A uses free software called Andúril,
                  distributed under the terms of the GPL v3. Code is available from
                  http://tiny.cc/TKAnduril
User interfaces:    [1] By default the FW3A is set to use SMOOTH RAMPING.
                  Instant access to TURBO mode is also provided.
                  [2] A more conventional STEPPED RAMPING UI is available if you
                  like discrete modes level. You can choose how many steps you want.
                  [3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly
                  lighting up targets. To exit this mode, physically disconnect power
                  [4] MUGGLE mode uses a reduced output.
                 [5] It has an electronic LOCKOUT for safety, but acts also as momentary
                 low light.Other functions: Battery check, sunset, beacon,
                 tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery:  One flat-top or button-top 18650 cell. An unprotected cell is recommended.
                Max. length 66 mm. Cell is not included.
Driver:    FET+7+1 driver. Low parasitic drain while OFF
Body:      Aluminum with hard-coat anodizing
Switch:   Electronic tail switch
Ingress rating: Equivalent to IPX7
Weight:  Approximately 120 g without cells
Size:      25.5 mm Ø head x 92.5 mm length.
         
FW3S WITH deep carry clip 
CREE XPL HI 1A 
CREE XPL HI 3D 
CREE XPL HI 7A