TLF/BLF FW4A Grey CREE XPL HI 3600lm EDC LED Flashlight Andúril UI
| Ask a question
Regular price $54.95 USD
Regular priceUnit price per
Germany Review:Lumintop FW4A 4xXPL Hi 1A 6500k 3600 Lumen Review
Emitter: four LEDs on a copper DTP MCPCB e.g.
Cree XP-L HI 3D(NW 5000K)
Cree XP-L HI 1A(CW 6500K)
Nichia 219C 4000K
SST20 4000K 95CRI
Optic: Standard TIR optics
Lens: Glass with anti-reflective coating
Flux: ~3600 lm (XP-L Hi), ~2100 lm (Nichia,SST20 4000K)
Intensity: ~10, 180 cd ANSI throw ~208 m (XP-L Hi)
Firmware: The FW4A uses free software called Andúril,
distributed under the terms of the GPL v3. Code is available from
User interfaces:  By default the FW3A is set to use SMOOTH RAMPING.
Instant access to TURBO mode is also provided.
 A more conventional STEPPED RAMPING UI is available if you
like discrete modes level. You can choose how many steps you want.
 MOMENTARY mode is useful for signaling purposes or rapidly/briefly
lighting up targets. To exit this mode, physically disconnect power
 MUGGLE mode uses a reduced output.
 It has an electronic LOCKOUT for safety, but acts also as momentary
low light.Other functions: Battery check, sunset, beacon,
tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery: One flat-top or button-top 18650 cell. An unprotected cell is recommended.
Max. length 66 mm. Cell is not included.
Driver: FET+7+1 driver. Low parasitic drain while OFF
Body: Aluminum with hard-coat anodizing
Switch: Electronic tail switch
Ingress rating: Equivalent to IPX7
Weight: Approximately 63 g without cells
Size: 28.5 mm Ø head x 92.5 mm length.
CREE XPL HI 1A
CREE XPL HI 3D